Wireless Salt Spreaders Complete Units

Wireless Salt Spreaders For Sale

Wireless Salt Spreaders For Sale. Complete Units.

If you're in the market for a new salt spreader or sander, look  no further than Control All Wireless. Partnering with SnowplowsPlus.com, we are able to bring you the SnowplowsPlus spreader lineup completely retrofitted with our wireless remote control kits. No more cords running through your truck cab. No more drilling into your truck at a variety of different areas just to install a controller. Now, you can have the exact same functions your used to on your favorite salt spreader but they'll fit in the palm of your hand. With our wireless remote control kits on tailgate salt spreaders you can even plug the salt spreader directly into the back of your truck's 7 prong plug in to provide a true "plug 'n play" system allowing you to easily move your tailgate salt spreader from truck to truck without needing to buy more wiring or more controllers. Up to 500 feet of connectivity from the wireless transmitter to the wireless receiver. 100% weather podded to keep the circuit board dry even in the harshest elements of snow, sleet, ice, and extreme cold. Check out all of our Western, Boss, and SaltDogg spreaders with our wireless remote control systems already installed and ready to melt some ice.

Wireless Salt Spreaders For Sale. Complete Units. You can either buy our universal salt spreader wireless remote controller kits to install on your salt spreaders, or buy one already pre-installed brand new from Control All Wireless & SnowplowsPlus

Showing all 24 results

24 feet of positive and negative wiring cables for our salt spreader wireless controller kits. Simply wire into your truck battery’s positive and negative posts to the corresponding wires on the 24ft power/ground cable provided and run the other end to the rear of your truck. Then you can plug your salt or sand spreader into the Anderson Plug directly to provide an easy to use wireless remote controls on any Salt or Sand spreader on the market today.
$119.95
This wireless remote control transmitter can be used as a complete replacement and conversion kit to your OEM salt spreader controllers in order to convert your wired controller to a wireless controller. Specifically, this wireless controller kit is for spreaders such as the Western Pro-Flo 525/900 salt sand spreaders, Boss TGS 800 Tailgate Salt Sand Spreaders, Fisher SpeedCaster salt spreaders, and any other dual electric 12v powered salt/sand spreaders. Purchase our 24ft wiring kits if you want to wire up your other fleet of trucks to allow you to move your salt/sand spreader from truck to truck with ease.
$699.99 $615.99
This 600DC1 Wireless transmitter controller and wireless receiver can be used as a replacement for any other wireless controllers built for the same on the market today including Meyer Part #63930, Fisher spreader wireless, Snow-Way, Snow-Ex, or any other brand on the market today.  Most Make/Model of vehicles have the battery charging pin of the 7-prong trailer plug-in activated. Many Chevrolet’s will not have the wire connected and or the fuse not installed for this function. The wire for this may be under the fuse box under the hood or taped to the wiring harness near the brake booster. Install this wire per mfg. instructions and install the proper fuse. If your vehicle is not equipped with the battery charging wire, you may add this by running a 8 or 10 gauge wire from the battery to the terminal on the truck side 7 prong plug as shown in the provided diagram. You must install a 40-amp fuse at the battery. Note 2015 and up Ford F150 and Ford 2017 and up F250,350 trucks do not have live power at the 7-prong trailer plug to operate a spreader, must use Anderson plug quick disconnect. If you do not have proper power and ground to the wireless unit it will not operate. 95% of failures are on the truck side and or failed 7 prong connections, always verify power to the unit as a first step in diagnosing a problem. Simply remove the cover from the receiver unit and press the black button. If the red light blinks you have power to the unit if not it is on the truck-side.
$449.00
Wireless remote controller transmitter for the 600DC kit which converts your existing single electric motor salt spreader into a wireless controller transmitter, replacing all of your existing functions. This is only the wireless transmitter from that 600DCKIT, so be sure you already own that before purchasing this. Check the color on your older wireless transmitter before ordering your 600KEYFOB as older models will have the red ring which will require you to purchase the red ring antenna each time going forward. All newer boards have the blue ring antennas and will going forward for any new purchases of the 600DCKIT wireless remote controller transmitter/receiver salt spreader conversion.
$89.99
The wireless remote controller conversion kit, 600DCKIT , is a single 12volt motor variable speed controller has 5 pre-set speeds in approx 1/5th increments. Comes with transmitter with glow in the dark label, rubber boot and lanyard. Receiver unit, 7 prong cord to plug into your truck receiver hitch and seal tight connectors. This unit is commonly used on single motor tailgate mounted salt sand spreaders such as Meyer, Western Low Profile, Boss TGS, SaltDogg Tailgate, Hiniker, Swenson and more. Completely replaces Meyer Part # 63930 Wireless Remote Control Kit and is hundreds of dollars cheaper! Most brands of vehicles have the battery charging pin of the 7-prong trailer plug-in activated. Many Chevrolet’s will not have the wire connected and or the fuse not installed for this function. The wire for this may be under the fuse box under the hood or taped to the wiring harness near the brake booster. Install this wire per mfg. instructions and install the proper fuse. If your vehicle is not equipped with the battery charging wire, you may add this by running a 8 or 10 gauge wire from the battery to the terminal on the truck side 7 prong plug as shown in the provided diagram. You must install a 40-amp fuse at the battery. Note 2015 and up Ford F150 and Ford 2017 and up F250,350 trucks do not have live power at the 7-prong trailer plug to operate a spreader, must use Anderson plug quick disconnect. If you do not have proper power and ground to the wireless unit it will not operate.
$499.99
The 625DC is a universal salt spreader wireless transmitter and wireless receiver for single motor variable speed control with an extra latching on/off function to operate another apparatus such as vibrate, light, or any aux function. 24′ power ground wiring, dust caps, sealtite connectors quick connect Anderson plugs all sold separately or sold in the 625DCKIT.
$439.00
Replacement wireless transmitter from the Wireless Salt Spreader Kit 625DC for single engine DC engine salt spreaders with additional function such as aux, lights, or vibrate function. Sold with boot and lanyard to provide additional protection. Easily pair with your existing 625DCKIT to tie into your salt spreader wireless remote controller system.
$89.99
The 625DC KIT is a universal salt spreader wireless conversion kit for single motor variable speed control with an extra latching on/off function to operate another apparatus such as vibrate, light, or any aux function. Comes with 24′ power ground wiring, dust caps, sealtite connectors quick connect Anderson plugs and complete instructions.
$589.00
The 650DC is a universal dual motor variable speed wireless transmitter controller with wireless receiver for a complete wireless connection to your salt spreader from up to 100ft away. The 650DC will operate 2 12 volt DC motors up to 1/2hp each. 3 pre-set speeds per motor. Sold separately are the 24′ power/ground cord with Anderson quick connect plugs and dust caps, seal tite connectors and can also be purchased all in a complete conversion kit, 650DCKIT. Commonly used on dual electric motor salt sand spreaders from Boss, Western,Fisher, SaltDogg, Meyer, Hiniker, Swenson, Monroe, Henderson, Downeaster, and more.
$449.00
The 650DCKEYFOB replacement wireless controller transmitter is used with our 650DCKIT in order to convert salt spreaders with dual motors to wireless remote controlled functions. Only buy this transmitter if you have already transitioned to wireless controls on your dual motor salt spreader. If not, please check out our 650DCKIT for everything you need to complete the wireless conversion.
$89.99
The 650DCKIT is a universal dual motor variable speed wireless transmitter controller with wireless receiver and everything you need to completely convert to a wireless connection to your salt spreader. The 650DCKIT will operate 2 12 volt DC motors up to 1/2hp each. 3 pre-set speeds per motor. Comes with 24′ power/ground cord with Anderson quick connect plugs and dust caps, seal tite connectors and complete instructions. Commonly used on dual electric motor salt sand spreaders from Boss, Western,Fisher, SaltDogg, Meyer, Hiniker, Swenson, Monroe, Henderson, Downeaster, and more.
$599.00
6ft Replacement Power & Ground Cord is a 6′ power / ground cord with Anderson plug and dust cover on one end and two 5/16″ eyelets on the other. Commonly used hand in hand with our wireless controller kits for salt spreaders, but can be used for many applications with our wireless transmitters and wireless receiver kits.  
$29.50
This extra large 8 button wireless transmitter, the LT9 wireless controller, is an FCC approved industrial strength wireless transmitter with 9 buttons. These an be used in place of any 8 function wireless transmitter controller kit sold by Control All Wireless. The extra large platform measures 5-1/2″ Tall x 3-1/3″ Wide. Can be used with all of our receiver units, even one, two, and four function remote kits.
$159.00
Replace your Gas Salt Spreader Wireless Transmitter Controller if you are having issues or simply need a back up controller. This works in accordance with our GASSPREADERPLUS universal wireless salt spreader kits and takes 10 seconds to pair to your existing salt spreader wireless system. Replacement transmitter for the gasspreaderplus can also be used on the standard gas spreader unit also. This transmitter comes with a rubber boot and lanyard and has a glow in the dark label.
$89.99
Replace your OEM salt spreader controller with a wireless controller transmitter with this GASSPREADERPLUS kit. Convert your salt sand gas spreader to a wireless spreader PLUS two additional functions such as vibrate, aux, or wireless lighting. Replaces Meyer Part # 63934 wireless spreader controller as well as Swenson Wireless Gas Spreader controllers or any other gas powered spreader. Wireless transmitter designed for gas engine driven de-icing equipment salt sanders. Can also be used on other engine remote control needs like start stop throttle up and throttle down. Transmitter has a rubber boot and lanyard with a glow in the dark label. Once installed, the wireless transmitter controls the salt spreader on and off, engine start and stop, throttle up and down. This unit is a very cost effective way to replace or convert equipment to wireless technology No more bulky, costly controls and wiring or corroded connections caused by salt damage. This unit will work with any engine driven salt sander such as Western, Henderson, Swenson, Meyer, Salt Dogg, Buyers, Downeaster, Snow-Ex, Boss.Unit has many other applications where the functions above can be applied to various applications Works with 12 DC Voltage.
$399.00
Replace your OEM salt spreader controller with a wireless controller transmitter with this GASSPREADER kit. Convert your salt sand gas spreader to a wireless spreader in minutes. Replaces Meyer Part # 66190 wireless spreader controller as well as Swenson Wireless Gas Spreader controllers or any other gas powered spreader with an OEM wired controller. Wireless transmitter designed for gas engine driven de-icing equipment salt sanders. Can also be used on other engine remote control needs like start stop throttle up and throttle down spinner conveyor on and off. Transmitter has a rubber boot and lanyard with a glow in the dark label. Once installed, the wireless transmitter controls the salt spreader on and off, engine start and stop, throttle up and down. This unit is a very cost effective way to replace or convert equipment to wireless technology No more bulky, costly controls and wiring or corroded connections caused by salt damage. This unit will work with any engine driven salt sander such as Western, Henderson, Swenson, Meyer, Salt Dogg, Buyers, Downeaster, Snow-Ex, Boss.Unit has many other applications where the functions above can be applied to various applications Works with 12 DC Voltage.
$389.99
Large Gas Spreader Wireless Transmitter . The Large LT9 transmitter can be used with the gas spreader wireless remote kit. This allows the user with a larger handheld platform. The transmitter has a durable rubber casing and glow in the dark label.
$169.00
Replace your Gas Salt Spreader Wireless Transmitter Controller if you are having issues or simply need a back up controller. This works in accordance with our GASSPREADER universal wireless salt spreader kits and takes 10 seconds to pair to your existing salt spreader wireless system.
$89.99
SALT DOGG TGS07 TAILGATE SALT SAND SPREADER, VIBRATOR, WIRELESS TGS07 Salt Dogg receiver hitch mounted salt/sand spreader with vibrator. Fitted with our exclusive 625DC Wireless Remote Control System. Control has 3 pre-set speeds, blast,  with vibrator on-off . Has glow in the dark label with rubber boot and lanyard. Comes with a 24′ Power ground cord to run from your battery to the back of the truck. Has anderson plug connections with dust covers. Ships truck freight
$2,149.00
This universal straight blade wireless remote controller kit includes everything you need to convert your wired controller on your straight blade snow plow to a wireless snow plow with a wireless controller. Throw out all of your old controller wiring and that wired controller, even better, sell it for the price of this wireless unit, if not more in most cases. This kit only includes the wireless transmitter and wireless receiver for the snow plow, you’ll need to either buy our kit or come up with your wiring/components to fill in the rest of the kit. This will convert most straight blade snow plows on the market today and older models from Western, Boss, SnowDogg, Meyer, Hiniker, Blizzard, Fisher, and more into a wireless remote controller with distances of up to 500 feet!
$389.00
The most popular tailgate salt spreader in the industry and rightfully so. Built to last and backed with a Western warranty. SnowplowsPlus adds our own flavor into the mix with our exclusive and one of a kind wireless remote system which allows you to either plug into your existing 7 prong on the back of your truck, or run positive and negative to the back of the truck, and away you go. 100 feet of wireless connectivity with 4 variable speed settings. For troubleshooting of the wireless remote control, or to see our remotes in an in-depth video, as well as complete re-programming instructions, head on over to the SnowMan’s Youtube page.
$2,299.99 $1,750.00
Get the Western Low Profile Model 500 tailgate salt spreader with a wireless controller and wireless plugin. Simply plug the spreader 7 pin plug into your existing 7 prong female end on the back of your truck (most trucks) and you’ll be ready to go. Salt spreaders with wireless like this can only be found at Control All Wireless and SnowplowsPlus and will provide you with a true “Plug N’ Play” system allowing you to freely and quickly move your salt spreader from truck to truck with ease.
$1,889.00 $1,600.00

Showing all 24 results