Two Function Wireless Remote Controllers

Two Function Wireless Remote Controllers

Wireless controls help free up extra time and is the quickest way to a more efficient job. Whether you are in the need of wirless winch remotes, wireless switch controls, led wireless lights controls, or any other 12v/24v dc application, Control All Wireless has a wireless remote control solution for you. Our wireless transmitters and wireless receivers have a variety of board options consisting of a mixture of both momentary (hold button to activate, release button to deactivate) and latching (press button once to activate, press again to deactivate) functions. Simply cut the cords, buy a new Control All Wireless remote control kit and install over place of your existing unit with our in depth instructions. Be rewarded with 100% connectivity from up to 500 feet away from the wireless transmitter. All wireless transmitters are weather podded to protect from any weather elements including heat, cold, rain, snow, sleet, or anything else you can throw at it. Backed by a 1 year warranty, Control All Wireless stands by all two function wireless remote controls and we are always here to provide any troubleshooting or installation help if needed. Use on dc applications, trucks, tow lighting, lighting, cranes, oil rigs, loaders, or any custom application operated by a 12V or 24V DC motor.

Two button wireless remote controllers for 12v dc applications. If you have a wired application, make it wireless with one of our 2 function wireless remote controls.

Showing all 6 results

Replace your wireless RF transmitter keyfob for our 2 button wireless remote control kit for DC applications. Easy to tie into your existing 2 function remote kit from Control All Wireless if you need to have multiple remotes tied to the same unit for rotating shifts or to simply have a spare. Use our 2 button transmitters on 12V applications such as boat lifts, trailer lights, dump trailers, RV lights, simple on off switches and much more.
$44.99
Convert your wired DC application into a two button wireless transmitter remote control with 1 momentary and 1 latching function which allow you to activate a function while pressing down a button, and keeping that function active until releasing the button. The latching function will activate at the button’s press, and deactivated once you press the button again. Two buttons assigned to two different functions means you can have a button for on and a button for off, provide wireless power to lights, wireless trailers and winches, as well as any other application powered by a 12V battery.
$269.00
Our 2DP0L1EFA is a latching on/off function Button 2 is a momentary function used for any momentary function you may need. As long as there is a 12 volt DC power source to your application and you’re ready to control everything from a wireless transmitter, you can use this 2 Button wireless transmitter and control your application from up to 500 feet away.
$269.00
Our 2DP0L1EFAVALVE is a latching on/off function to open and close the valve Button 2 is an optional momentary function used for any momentary function you may need Button 2 can be used as an engine shut off function with the purchase of our optional ground relay kit Designed for an air compressor air on/off control or water on/off control Comes with a Rainbird 1″ model 100GM valve. Can be used for fluid or air depending on the application need as long as there is a 12V power source to your application and you’re ready to control everything from a wireless transmitter.
$369.00
1 button has a dual function (double pull) as well as a momentary function to provide you with a seamless transition to wireless remote controller for applications running off of a 12V battery. Run any application from a wireless transmitter and wireless receiver for trailer lights, dump trailers, tow trucks, boat lifts, security lights, and anything in between. If it’s ran off a 12V, we can make it run off a wireless controller.
$259.00
Convert your wired DC application into a two button wireless remote control with 2 momentary functions that allow you to activate a function while pressing down a button, and keeping that function active until releasing the button. Hundreds of applications including trailers and winches, as well as any other application powered by a 12V battery.
$259.00

Showing all 6 results