Gas Engine Spreader Wireless Remote Control Conversion Kit – "PLUS" Version 2 Extra Functions | Control All Wireless

Gas Engine Spreader Wireless Remote Control Conversion Kit – “PLUS” Version 2 Extra Functions

Replace your OEM salt spreader controller with a wireless controller transmitter with this GASSPREADERPLUS kit. Convert your salt sand gas spreader to a wireless spreader PLUS two additional functions such as vibrate, aux, or wireless lighting. Replaces Meyer Part # 63934 wireless spreader controller as well as Swenson Wireless Gas Spreader controllers or any other gas powered spreader. Wireless transmitter designed for gas engine driven de-icing equipment salt sanders. Can also be used on other engine remote control needs like start stop throttle up and throttle down. Transmitter has a rubber boot and lanyard with a glow in the dark label. Once installed, the wireless transmitter controls the salt spreader on and off, engine start and stop, throttle up and down. This unit is a very cost effective way to replace or convert equipment to wireless technology No more bulky, costly controls and wiring or corroded connections caused by salt damage. This unit will work with any engine driven salt sander such as Western, Henderson, Swenson, Meyer, Salt Dogg, Buyers, Downeaster, Snow-Ex, Boss.Unit has many other applications where the functions above can be applied to various applications Works with 12 DC Voltage.

$399.00

Quantity

Description

Gas Engine Spreader Wireless Remote Control Conversion Kit – “PLUS” Version 2 Extra Functions

Gas Engine Powered Salt Sand Spreader Wireless Controller – Universal Wireless Controller. Replace Your OEM Controller with Wireless. 

Part #GASSPREADERPLUS is a wireless receiver and wireless transmitter which converts your single gas motor powered salt spreader such as the Western Salt spreaders, Meyer Spreaders, Swenson Spreaders, or any other single gas motor salt spreader on the market today. With the “PLUS” version of the gas spreader wireless controller, you not only are able to wire up all of your gas salt spreader existing functions, but also two additional functions such as a backup light, work light, aux, vibrate, or any other functions requiring wireless control.  Convert easily and use a wireless remote controller that can control all of your existing functions from up to 500 ft away. Easily wire up an 8 gauge power/ground to the back of your truck and plug in with Anderson Plug Quick Disconnects. Even at this price, it’s still cheaper than OEM new wiring and controller, which can cost upwards of $800 for all new parts. That means after you buy our universal salt spreader wireless controller, you can sell your old OEM control box, controller wiring, and control mount and never look back. The wireless controller allows engine start, stop. Throttle up, down. Clutch engage, disengage. Plus get two extra on/off functions for lights and accessories. Works up to 500′ away.

  • Operational range of up to 500 feet from wireless transmitter to wireless receiver.
  • Weather potted to protect the wireless receiver in any harsh weather conditions including extreme cold, rain, sleet, snow and ice.
  • Covered by a 1 year warranty.
  • Instant wireless receiver activation to wireless DC receiver.
  • 1 in 16 million address combinations ensure you can have many wireless transmitters added to each receiver if needed.
  • Up to twenty wireless transmitters can be paired to a single receiver.
  • Wholesale discounts available.
  • works with almost all brands of gas driven spreaders, Boss, Western, Meyer, Swenson, Snow Dogg, Down Easter and more

GAS Salt Spreader Universal Wireless Transmitter Controller with TWO Extra Functions

Buy this GASSPREADERPLUS and quickly benefit your company with wireless controllers on your salt spreaders. Buy a few more power and ground wiring kits to help you move your single gas motor Tailgate Salt Spreader from truck to truck throughout the night as needed if a truck goes down or a simple shift change without the need to wire up different trucks with hundreds of dollars in wires and cables, not to mention oem wired controllers themselves. This wireless controller and wireless receiver can take a beating and have been tested in the harshest Minnesota Winter weather and can be used anywhere including in ice, snow, sleet, rain or severe cold. The Wireless Receiver is 100% weather potted and covered by a 1 year warranty along with dedicated customer service in case you ever need help installing, repairing, or troubleshooting any of our wireless remote control systems.

Wireless gas powered salt spreader controllers work perfectly on gas spreaders from Western, Hiniker, Swenson, Meyer, Boss, Fisher, SaltDogg or Hiniker salt spreaders or any other single gas motor spreader models on the market today. You will save you money, time, and overall efficiency as soon as you make the switch. The wireless controller saves you from hard-wiring  a controller and all of its wiring harnesses, approx $800 for the oem wiring and controller and allows you to transfer the unit easily to other trucks that are setup with the needed power and ground cables. We carry a wide variety of wireless controls for the snow industry and hundreds of other dc applications. Built by us in America. All of our controllers are industrial use controllers.

The Universal Gas Motor Salt Spreader Wireless Controller Transmitter/Receiver Contains the Following:

  • (1) GASSPREADERPLUS Receiver
  • (1) GASSPREADERPLUS Transmitter with label , boot and lanyard
  • (1) relay
Wireless Gas Spreader Plus 2 Bonus Functions

Gas Spreaders with Vibrate/Lights/Aux – Salt Spreader Universal Wireless Transmitter Controller

The GASSPREADERPLUS Wireless gas engine spreader Controller provides engine start, stop. Throttle up.down. Clutch engage, disengage. Also provides tow extra on/off functions for lights or accessories.

GasSpreaderPlus Wireless Remote Controller Transmitter Kit for Gas Salt Spreaders

Additional information

Weight 2 lbs

Reviews

There are no reviews yet.

Be the first to review “Gas Engine Spreader Wireless Remote Control Conversion Kit – “PLUS” Version 2 Extra Functions”
  • Control All Wireless provides wireless remote control solutions for 12V and 24V DC applications. With over 14 years of experience, dedicated engineers for custom molding, and bulk ordering capabilities, CAW is the go to place to cut the cords.

    FAST Shipping

    On all orders, no matter the size

    High Quality

    Top-end verified quality

    Help Center

    24/7 customer support